Categories
zoom

– Zoom Settings & In-Meeting Controls: Zoom Instructor Training

Looking for:

How to change zoom location

Click here to ENTER


 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

In many apps, you can zoom in or out on specific items. For example, you can double-tap or pinch to look closer in Photos or expand webpage columns in Safari. You can magnify the entire screen Full Screen Zoom or magnify only part of the screen with a resizable lens Window Zoom. And, you can use Zoom together with VoiceOver. Zoom Controller: Turn the controller on, set controller actions, and adjust the color and opacity.

Double-tap the screen with three fingers or use accessibility shortcuts to turn on Zoom. Adjust the magnification: Double-tap the screen with three fingers without lifting your fingers after the second tapthen drag up or down. Or triple-tap with three fingers, then drag the Zoom Level slider. Uow adjust the settings with the Zoom menu, triple-tap /17355.txt three fingers, then how to change zoom location any of the following:.

While using Zoom темка, error 3038 zoom espaГ±ol это Magic Keyboard, the Zoom region follows the insertion point, keeping it in the center of the display. See Pair Magic Keyboard with iPhone. How to change zoom location turn off Zoom, double-tap the screen locaion three fingers or use accessibility shortcuts. On an iPhone with Display Zoomyou can see larger onscreen zoim. Adjust any of the following: Follow Focus: Track your selections, the text insertion point, and your typing.

Smart Typing: Switch to Window Zoom when a keyboard appears. Keyboard Shortcuts: Control Zoom using shortcuts on an external keyboard. Maximum Zoom Level: Drag the slider to adjust the level. If you use iPhone with a pointer device, you can also set the following below Pointer Control: Zoom Pan: Choose Continuous, Centered, or Edges to set how the screen image moves with the pointer.

Adjust Size with Zoom: Allow the pointer to scale with zoom. Use Zoom Double-tap how to change zoom location screen with three fingers or use accessibility shortcuts to turn on Zoom. To see more of the screen, do any of the following: Adjust the magnification: Double-tap the screen with three fingers without lifting your fingers after the second tapthen drag up or down.

Pan to how to change zoom location cyange Full Screen Zoom Drag the screen with three fingers. Show Controller: Show the Zoom Controller. Zoom in or out: Double-tap the controller. Pan: When zoomed in, drag the controller.

 
 

 

Knowledge Article View – Services & Support

 

When you work with maps and scenesyou can zoom in and out, move around, and in продолжение здесь case of scenes, move up, down, how to change zoom location look around. Other ways to navigate include the following: Bookmarks —Store the camera location and even range or time properties so you can return to loaction later.

Linked views —Synchronize navigation across multiple views with the currently active view. Map scales 2D —Set the map scale to display a map at zoomm desired scale.

Scene height 3D —Set the scene’s camera height above the ground elevation surface. Pause and refresh drawing —Improve interactive performance when navigating maps and chhange. Camera how to change zoom location —View or edit the camera location or direction values.

Navigation in 3D —Explore in x,y and z, rotate and tilt, access how to change zoom location for planar chaange and first person navigation. Keyboard shortcuts —Use keyboard keys to perform navigation actions or use in conjunction with the Explore tool to reposition the view. Learning how to navigate effectively can improve the way you interact with maps and scenes.

You may need to zoon a combination of these options when navigating. Navigation commands are available on the Map tab in the Navigate group. Some commands also exist in context menus when you right-click a layer—for example, zoom to the currently selected set of features.

Additionally, some tools are turned on and off from the View tab. For example, click a button to activate such as view linking or display an on-screen window control such as the navigator and camera properties.

The default tool for maps and how to change zoom location is the Explore how to change zoom locationwhich is used to move, pan, identify feature attributes via a pop-upand zoom in and out of maps and scenes. When you pan through a map or scene with the mouse, the pointer becomes a hand. Right-click and hold the mouse button, and move the mouse up or down to zoom. The pointer becomes a magnifying glass when you click the right mouse button.

All Explore tool capabilities are described in the table below alongside other common navigation commands. On the Map tab, in the Navigate group, click the dialog box launcher button to change the default navigation behavior.

Navigation command Description Explore. A multifunctional tool for navigation and feature identification. This is the default tool when you open a new or existing project. Left, right, and wheel mouse buttons all have built-in capabilities as follows:. Full Extent. The view zooms to the full extent of the data in the map. Zoom To Selection.

The view centers and zooms in on the extent of the selected set of features. Zooming to a single selected feature zooms to its full geometry; however, when zooming to a single selected point, the view zooms in a fixed percentage. Every change in the extent of the map is stored lcoation you can go backward and forward through in a list of map extents.

Locafion the locatiln back to the previous extent or forward to the next extent, if it how to change zoom location. When the Explore tool is active, you can zoom install ubuntu snap right-click to navigate to the previous or next extent. This list of extents how to change zoom location only maintained as long as a view is open.

The positions hoow cleared after the application is closed, even when a view is saved as open in a project. How to change zoom location bookmarks or use existing bookmarks to navigate to locations. Optionally, open the Bookmarks pane to manage existing bookmarks by performing actions such as update or remove. Go To XY. Display an on-screen control to view or edit the camera coordinates, direction and field-of-view angle.

You can change the location’s units format, which matches the coordinate system used in the map, as needed. Two optional navigation tools can also be added by customizing the ribbon or the Quick Access toolbar. Navigation command Description Rectangle Zoom In. Zoom in to an area of interest by clicking and dragging a rectangular extent in the map or scene. The extent of the view updates to best fit the dragged rectangle. To expose the tool, you can either turn on the tool in the Quick Access Toolbar how to change zoom location, or search for the Rectangle Zoom In tool in the Customize the Cnange tab of the project Options dialog box and add it to a specific location in the user interface.

Rectangle Zoom Out. Zoom out from an area of interest by clicking and dragging a rectangular extent in the map or xhange. The extent of view centers and increases based on the size of the rectangle. Depending on where you want to expose the tool, search in All Commands for the Rectangle Loccation Out tool in either the Quick Access How to change zoom location or Customize the Ribbon tabs of the project Options dialog box.

The on-screen navigator provides camera locztion commands in a single control in the lower left corner of a view. The explicit camera controls are useful fhange navigating complex content, llocation 3D scenes that are underground, in buildings, or that contain lidar.

You changf rotate around a target point to inspect and edit features in 3D. The navigator always indicates north and the cardinal points chahge the navigator are clickable to zoomm you reorient. The control is suitable for touch screen interaction. The navigator in a minimized state shows locaion the heading. The navigator in a map is shown. The navigator in a scene is shown.

To display or hide the navigator in a view, on the View tab, in the Navigation group, click the Navigator button. Drag the upper right corner to resize the control. In адрес minimized display mode, the navigator shows a north indicator only. In 3D, there are additional buttons to switch how to change zoom location modes between planar navigation and first-person navigation.

You can pan your map or scene by clicking and dragging the outer ring. A partially transparent arrow indicates the pan direction and velocity. Click the north arrow to reset the camera how to change zoom location face north again. In the maximized display mode, in maps, there are additional capabilities locatoin you can rotate the view, zoom in and out, and turn to face east, west, or south. In scenes, you can rotate the view direction onlypivot around the target point in all three axes, zoom in and out on the target point, move продолжение здесь camera up and down, and look around from the current camera hoq.

By default, the navigator is hidden in maps and shown in the heading state in scenes. To change these default settings, click the Project tab and click the Options tab.

On how to change zoom location Options dialog box, under the Application heading, click the Navigation tab. Expand the On Screen Navigator heading to configure these options. Ho addition to the tools above, there are other specific navigation methods, buttons, tools, and commands. For example, you can change the map extent based on a previous action, or, after selecting features, zoom directly to them.

To navigate a map or scene using buttons and how to change zoom location, use the following options:. Press the Alt key and click a how to change zoom location in the Contents pane to zoom to the layer’s extent. Use the Select By Attributes or Select Ohw Location geoprocessing tool and zkom the Selected Features results at the bottom of the view, or use the how to change zoom location feature layer’s context menu in the Contents pane.

Create a set of bookmarks for the view. Or use the Previous Extent and Next Extent navigation chajge. There are two buttons at the lower right of map and scene views to help with interactive performance, Pause Drawing and Refresh. When a map contains a large amount of data, it takes time to to adjust screen size computer how the content into memory how to change zoom location draw it.

When a lpcation is actively drawing data, the Refresh button spins. Click Refresh to cancel the адрес. Any features that are already drawn remain, but no additional features are added to the display.

Alternatively, use the Pause Drawing button to temporarily stop the drawing of maps and scenes. When как how to unlimited zoom meeting time этим button is clicked, the word Paused appears across the top of the view cuange no additional data loads until it is switched off. All navigation and editing functionality is available during this time so you can make changes to the map’s content without causing a redraw of the map.

If you turn off the visibility of a layer or add a how to change zoom location layer to the map, the new content does not display kocation you exit the paused drawing state. In layout viewsthe paused drawing state only applies to map frames.

It does not affect other dynamic elements, such as north arrows or scale bars. In a map, you set the map scale. In a scene, you set the height above ground. When a map draws, you can display it at any map scale. You can set a series locatin map scales so you can select map scales directly from a list.

To change scales, the scale control is located at the lower left corner olcation the display. You can type a value, or click the scales list and choose a value to zoom to the specified scale. To customize and manage the list of scales, click Customize to open the Scale Properties dialog box.

Height values in 3D are listed at the bottom of the scene’s display and depict olcation above ground. For example, if you enter a value of 2 meters as a 3D height, the viewpoint adjusts to 2 meters above ground whether you’re in a mountain range or by the ocean. The value displayed in the 3D height box is based on the current resolution of the elevation being displayed.

It becomes progressively more accurate the closer you get to the locatoon.